PROGRAMMING OF VRAE
4 - 33
4.7.5 Change Back Light Mode
The VRAE monitor allows the user to choose to turn on and
off LCD back light automatically when ambient light falls
below or above a threshold level or to turn on and off the
back light manually by pressing the
[N/-]
key.
1. The sixth sub-menu item in Table 4.6 is “Change
Backlight Mode?”
2. Press
[Y/+]
key, the display shows the current back light
mode: “Back Light Mode = Auto turn on?”
3. Press the
[Y/+]
key to accept the currently displayed back
light mode. Press
[N/-]
key to change to the other back
light mode: “Back Light Mode = manual turn on?” Press
[MODE]
key to exit this sub-menu and move to the next
monitor setup sub-menu.
4. If there is any change to the existing selection, pressing
the
[Y/+]
key the display wi ll show “Save?” Then, press
the
[Y/+]
key to accept or the
[N/-]
key to discard and
move to the next sub-menu.
