PROGRAMMING OF TOXIRAE
4 - 26
4.7.2 Set Month
1. The second sub-menu item in Table 4.5 is to set month.
Display shows "Month =" and "+- 02" with the left-
most digit flashing, where "02" is the current month
value of the real time clock.
2. To modify this value, starting from the left-most digit,
use the
[Y/+]
or
[N/-]
key to change the digit value and
press the
[MODE]
key momentarily to advance to the
next digit. The flashing digit will move on to next digit
to its right. Repeat this process until both digits of the
new month value are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode. If
there is any change to the existing value, the display
shows "Save?" Press the
[Y/+]
key to accept the new
value and move to next sub-menu. Press the
[N/-]
key
to discard the changes and move to the next menu
option.
3.
To preserve the current month value in the clock, press
and hold the
[MODE]
key for one second, the unit will
exit data entry mode and move to the next sub-menu
option.
