OPERATION OF TOXIRAE
2 - 17
Start/stop datalogging manually
If manual datalogging mode has been selected, from the
normal operation menu, toggle through the menu using the
[MODE]
key until the
Log On/Off?
prompt is displayed.
Pressing the
[Y/+]
key while “Log On?” is displayed, turns
on datalogging and displays a"
⎡
" symbol in front of the
"ppm" to inform user that the datalogging is on. Likewise,
pressing the
[Y/+]
key while “Log Off?” is displayed, turns
off datalogging and causes the "
⎡
" symbol to disappear.
Pressing the
[MODE]
or
[N/-]
key, while prompted with
“Log On/Off?”,
will not cause any change in datalogging
status. All other modes of datalogging will start and stop
automatically without any user intervention.
Automatic Datalogging
Datalogging is automatically started at the end of each
“datalogging period” when the unit is turned on.
Scheduled Start/Stop Datalogging
Data logging starts at a specific date and time, and logs
data at the “datalogging period” rate. When the “stop date
and time” is reached, the unit stops datalogging. This
mode, as others, requires that the unit be turned on first
before the datalogging can start.
Periodic Start/Stop Datalogging
Data logging starts daily at a specific time, and logs data at
the “datalogging period” rate. When the “stop time” is
reached, the unit stops datalogging. This mode, as others,
requires that the unit be turned on first before the
datalogging can start.
