OPERATION OF TOXIRAE
2 - 10
Note: When the unit is in communication standby
mode, it stops monitoring the gas concentration
and stops datalogging. Datalogging must be
manually restarted, if unit is in manual log mode.
Press the
[MODE]
or
[N/-]
key to exit the communication
standby mode and move to the next display, which shows
instantaneous readings.
To choose a display:
These eight displays are arranged in a "round robin" order:
instantaneous
=>
TWA => STEL
=> Peak
=>
battery voltage=> Run time => Log On(Off)? =>
PC comm? => instantaneous
To choose a specific display, press the
[MODE]
key one or
more times in normal operation mode until the desired
display appears. For example, to display the STEL
reading, press
[MODE]
key
twice, and so on.
Display time out
In all displays (except the instantaneous reading) the
display will automatically change to the instantaneous
reading after a one-minute interval if no key is pressed.
