12
Nominal voltage of the power supply (specified on the power supply data plate)
has to be compatible with the mains nominal voltage.
Procedure:
Plug the power supply to the mains.
Connect the power supply plug to the socket located on the scale's side.
An ON/LOAD diode on indicator housing is turned on,
.
Press
key, it is to be found at the top of the operation panel.
Mind to keep the key pressed for about 0.7 s. operating system and
RADWAG program are loaded, this is signalled with blinking of red
ON/LOAD diode.
Upon completed start-up, the home screen is displayed automatically.
The device is ready for operation.
For detailed information regarding indicator program read
„PUE 7.1 Indicator Software Manual”.
6. HOME SCREEN
The home screen can be divided into 4 sections: a top bar, a weighing result
window, workspace, pictograms.
Home screen layout:
