33
Digit marker
No, Yes
Enabling/disabling digit marker.
Converter speed
6.25, 12.5, 25, 50,
100, 200, 400,
800, 1600, 3200
Converter rate, set depending on the intended
use of MW -01 module, used for dynamic scales
(default value:
6.25
).
Adjustment
-
Adjustment process.
Start mass
determination
-
Determining start mass of MW -01 module (the
procedure is likewise to the one described
in section 10.5).
Adjustment
-
MW-01 module adjustment (the procedure is
likewise to the one described in section 10.5).
Start mass
-
Start mass value (in divisions).
Adjustment factor
-
Adjustment factor.
Linearity
-
MW-01 module linearity correction (the
procedure is likewise to the one described
in section 10.6).
Determine
-
Determining linearity correction points.
Delete
-
Deleting linearity correction.
Corrections
-
Entering corrections for determined linearity
correction points.
Information
-
Information (read-only).
Serial number
-
Serial number of MW -01 module.
Weighing firmware
version
-
Preview of MW -01 module's software version.
Divisions
-
Display of A/D converter divisions.
Miscellaneous
-
Miscellaneous parameters.
Pue7: Communication
-
Group of parameters for
communication
between PUE 7.1 indicator and MW -01 module
(read section 11.2.1).
MW-01: Communication
-
Group of parameters enabling modification
of transmission parameters for MW -01 module
using PUE 7.1 indicator (read section 11.2.2).
Set default
-
Restoring
default
settings
of
MW-01
module.
Set respective parameter values and return to weighing, saving changes.
11.3. Communication with HRP Weighing Module
Connection between PUE 7.1 indicator and HRP weighing module requires:
establishing communication between the PUE 7.1 and the HRP module,
editing and record of transmission parameters, and all factory parameters,
to the HRP module memory, using the PUE 7.1 indicator.
