- 108 -
Weighing T+ A
Selecting this option opens a screen with
keyboard for entering name of a sample.
Enter the name and accept it by pressing
<Enter> button that is followed by displaying
windows for entering the values of ambient
conditions (humidity and temperature).
Caution:
If the <Ambient conditions> option is disabled
in the working mode settings – set to <No>
then the software skips the need to specify the
ambient conditions parameters.
After entering the values and pressing <OK>
button the software returns to the main
window, and the workspace area contains new
data on a initiated process.
During process course the command bar and
the screen display messages informing a user
on the consecutive steps to be carried out.
Load the weighing pan with a container for a
sample and press <OK> button.
The value of container mass is assigned to a
sample as its tare, the indication is zeroed and
it is followed by a command ordering placing a
sample in the container. Place the sample in
the container and after stabilizing the
indication press <OK> button.
The balance displays a message on adding a
sample and saving the weighments of tare and
sample. Accepting the messages is followed
by a command in the bottom bar ordering
taking the weighed sample off the weighing
pan and a question on process continuation.
In order to continue the process press <OK>
button, so that the software automatically goes
to editing name of the second sample.
Act as in case of the first step and weigh
another sample.
The process can be aborted by pressing the <
> pictogram.
Summary of Contents for MYA.3Y
Page 2: ...2 APRIL 2013...
