RADWAG MYA.3Y, User Manual

Page: 36 / 132

- 36 -
18.1. Adding a new operator
Press pictogram “PLUS” located in the top bar of the display which opens
a window for entering name of an operator. After entering the name,
accept it by pressing OK button. The name of a newly created user is
displayed in the panel with balance users.
Caution:
Adding a new balance user is not allowed for each balance user, and its accessibility depends
on authorization level assigned to a user.
18.2. Deleting a operator
Press pictogram “MINUS” located in the top bar of the display which
opens a window with all users of a balance. Select a user profile to be
deleted. Pressing the field of a selected user profile causes its automatic
deleting. This process does not require an additional acceptance,
therefore it requires caution.
Caution:

Deleting a user is not allowed for each balance user, and its accessibility depends
on authorization level assigned to a user.

A user profile described as DEFAULT is impossible for deleting.
18.3. Selecting a operator
The function enables selecting a user profile to be enabled. It is carried
out by pressing a field located next to the name of a user. Pressing this
field is simultaneous to enabling the user profile, thus the
corresponding parameters are AUTOMATICALLY activated.
Name of a selected user is simultaneously indicated in the upper bar of the display.
Caution:
Each balance user may have some limitations in balance operation. The range of limitation is
determined by the balance administrator – i.e. DEFAULT USER.
18.4. Operator settings
The user settings are accessed by pressing field with name of a user. In order to
ensure the highest ergonomics and speed of operation, the complete upper bar is an
active field, except for the area that enables selecting a user.
a – field providing access to user settings; b – field for selecting a user.