- 117 -
APPENDIX A – cooperation with EPSON printer
An EPSON printer is a device subordinate to a balance, thus any data is sent from
balance level. Correct cooperation between a balance and a printer requires setting
the baud rate to 9600bit/sec. as standard the baud rate of a balance is set to 4800
bit/sec.
If a printer cooperates with the balance via its USB port, then the baud rate settings
have no relevance.
Changing baud rate settings
PROCEDURE:
o
Press SETUP pictogram or press SETUP button
o
To open a screen on balance internal settings – press PERIPHERALS pictogram
o
Press PRINTERS field and set:
−
Printer type to EPSON
−
Printer port as USB or RS 232
o
Check transmission parameters for the
RS 232 socket if used, and set:
−
Baud rate: 9600
−
Parity: no
−
Data bit: 8 bits
−
Stop bits: 1bit
−
Handshake: no
o
Return to weighing with procedure of saving changes.
Cable connecting a balance and a printer
In case of using the USB port use a standard cable for connecting the devices. When
using the RS 232 interface, use cable DB 9/F – DB 25/M. Cable cross-section:
Summary of Contents for MYA.3Y
Page 2: ...2 APRIL 2013...
