RADWAG MYA.3Y, User Manual

Page: 78 / 132

- 78 -
In practice, it is a tolerance for the mass
to be weighed, i.e. the acceptance field
in which the dosed mass is recognized
as correct.
The tolerance thresholds may be
asymmetric, e.g.
− high threshold: +5%
− low threshold: - 2%
the values of the checkweighing
thresholds will be displayed in the
workspace area.
Dosing
Enter the value of the target mass to be reached during comparing the
following loads with the reference mass (reference standard).
For example:

reference mass =100g

target mass = 60%
----------------------------------------------

actually weighed mass = 62,0g

displayed value 62,000%

colour of the bargraph is green – sample is within the acceptance field
as the set target mass was reached.
The above example shows that the
target mass is not obligatorily the 100 %.
It may accept an optional value for the
purpose of preparing simple mixtures if
the ingredients requires adding in
percents and not by their weight.
Bargraph is one of the components of
the WORKSPACE AREA in the percent
setup mode, thus it does not require
additional activating to be displayed.
Declaring the Target Mass
PROCEDURE:
o
Pres Quick access key
o
The display shows a screen with
the TARGET MASS
o
Press field with the value of the
mass which opens a screen for
entering new mass value
o
Accept the entered value by
pressing OK button.
RETURN TO WEIGHING
o
press “Return” arrow in the upper
left corner of the window of press
working mode pictogram