RADWAG HRP 1100, User Manual

Page: 39 / 58

39
SUI
Immediately send measurement result in current
measuring unit
C1
Switch on continuous transmission in basic
measuring unit
C0
Switch off continuous transmission in basic
measuring unit
CU1
Switch on continuous transmission in current
measuring unit
CU0
Switch off continuous transmission in current
measuring unit
DH Set min checkweighing threshold
UH Set max checkweighing threshold
ODH Give value of min checkweighing threshold
OUH Give value of max checkweighing threshold
NB
Give balance serial number
UI Give accessible units
US
Set unit
UG Give current unit
BN Give balance type
FS Give max capacity
RV Give program version
A Set AUTOZERO
PC Send all implemented commands
FIS Set filter
GIN Give status of inputs settings
GOUT Give status of outputs settings
SOUT
Set outputs
IC Internal adjustment
PS Send module settings
Caution: Each command must end with CR LF characters.