RADWAG HRP 1100, User Manual

Page: 13 / 58

13
1.8. Supervision over Metrological Parameters
Metrological parameters need to be checked in determined time
intervals. Inspection frequency is conditioned by ambient conditions
in which the module is used, kind of carried out processes and
adopted quality management system.
1.9. User Manual Significance
Even if you are experienced and have worked with this type of device
before it is very important to read the installation manual carefully
before switching it on.
1.10. Operator Training
The platform should be utilized and supervised only by users who
have been trained to operate such type of a weighing instrument.
1.11. Maintenance
Caution:
•
Be careful so as not to damage the mechanism.
•
For maintenance use mild cleanser preventing corrosion.
•
Avoid directing strong stream of water directly onto weighing
module's gasket membrane.
Cleaning Stainless Steel Components
Avoid using cleansers containing any corrosive chemicals, e.g.
bleach (including chlorine). Do not use cleansers containing abrasive
substances. Always remove the dirt using microfiber cloth to avoid
damage of protective coating.
In case of a daily maintenance:
•
Remove the dirt using cloth dipped in warm water.
•
For best results, add a little bit of dishwashing detergent.
Cleaning Powder-Coated Components
For preliminary cleaning process stage you need running water or
wet sponge featuring large holes, this will help you to remove loose,
heavy dirt.