RADWAG HRP 1100, User Manual, Page: 41 / 58

41
Response options:
T_A CR LF - command understood and in progress
T_D CR LF - command carried out
T_A CR LF - command understood and in progress
T_v CR LF - command understood but taring range is exceeded
T_A CR LF - command understood and in progress
T_E CR LF
- time limit exceeded while waiting for stable measurement
result
T_I CR LF - command understood but not accessible at this moment
Give tare value
Format: OT CR LF
Response: OT_TARE CR LF - command carried out
Response format:
1 2 3 4-12 13 14 15 16 17 18 19
O T space tare space unit space CR LF
Tare - 9 characters, right justification
unit
- 3 characters, left justification
Caution: Tare value is always given in adjustment unit.
Set tare
Format: UT_TARE CR LF , where TARE - tare value.
Response options:
UT_OK CR LF - command carried out
UT_I CR LF - command understood but not accessible at this moment
ES CR LF - command not recognised (tare format incorrect)
Caution: Use dot in tare format as decimal point.