Radlink CR Pro User Manual Download Page 16 | Manualshive

Page: 16 / 67

background image

Chapter 2: Software Setup and Configuration

Radlink

Software Installation

All of the required software is installed at the factory. The software can be reinstalled
using the enclosed CD. This includes the driver, installation and startup program,
application and toolkit.

Radlink

Application Installation Procedures

Radlink Clean Install Procedures

Note: The CR Pro is configured with the CR Pro Image Acquire software as part of the
manufacturing process and is already installed.

1. Double click the “Double Click to Install Radlink” icon. This installs the Radlink

application. (Simply inserting the Radlink CD will cause the setup program to
automatically run on most machines).

2. If you are sending images to PACS servers or other DICOM devices. Contact

your PACS administrator for the proper settings.

Radlink Update Install Procedures

The following are the installation procedures for updating the Radlink Application to the
current Release:

1.

From “Add Remove Programs” in the control panel, uninstall the Radlink
application then reboot the computer.

2.
3.

Double click the “Double Click to Install Radlink” Icon on the install CD. This
installs the Radlink application. (Simply inserting the Radlink CD will cause the
setup program to be automatically run on most machines).

4.

The Radlink Database will need to be synchronized to your existing Image
Archive. Open the Image Acquire Screen and Click “File

à

Database

Maintenance” menu item then click the “Sync. Database” button.

5.

Periodically check

www.radlink.com

for software updates. Select Software

Updates. Read the release notes for the latest release. If a newer version
interests you, you should download the entire release folder to your desktop then
double click “Double_Click_to_Install_Radlink” program in the downloaded folder.
This will start the installation process for the updated release.

This completes the Software installation procedure.

16

«
...
14
15
16
17
18
...
»

Summary of Contents for CR Pro




































































Reviews:

No comments

Related manuals for CR Pro

Brand: OEG Pages: 32

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 1

KV S2026C - Document Scanner

Brand: Panasonic Pages: 2

Brand: Panasonic Pages: 6

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 51

KV S2026C - Document Scanner

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 61

Brand: Panasonic Pages: 64

Brand: Panasonic Pages: 67

Brand: Panasonic Pages: 75

Brand: Panasonic Pages: 114

Brand: Panasonic Pages: 123

KV-S1020C SERIES

Brand: Panasonic Pages: 117

Brand: Panasonic Pages: 160

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands