Introduction
The Radlink CR Pro is a radiological device, that scans erasable phosphor plates
and transmits the image to an imaging onboard computer for review, archiving or
forwarding to other facilities for further evaluation and archiving. The CR Pro
handles plates of the following size:
Inch Standard
10in x 12in (203.2mm x 254.0mm)
14in x 17in (355.6mm x 431.8mm)
The CR Pro’s unique design makes it low maintenance, as there are no mirrors
or galvanometers, which are subject to frequent adjustment. Additionally, the CR
Pro mechanism is shock mounted to allow for more reliable operation.
Multiple file formats are supported including TIFF, JPEG, PNG, BMP, DICOM
and Raw formatted images for both reading and writing.
Multiple images may be sent simultaneously to PACS hosts, and the embedded
DICOM Spooler handles multiple destinations and a DICOM broadcast capability.
The CR Pro has relatively few and connections, making the installation process a
quick and efficient procedure.
An external Uninterruptible Power Supply (UPS) accepts input voltage of
115VAC nominal at 50 to 60Hz or 220VAC nominal at, 50Hz to 60Hz at 15 A
(rms) for 115 VAC and 7.5A (rms) for 220 VAC Input current, allowing the CR
Pro to be installed in most countries in the world.
It is recommended that the entire User Manual be read before proceeding with
the installation.
10
