RadioLink Electronic Ltd
14
Default channel is CH5 while setting the 3-way switch as SWC and the 2-way switch as SWA or SWD,
pilots can personalize the setting basing on own flight habits
Note
The PWM value ( RATE on the second column as below shown) can be modified with corresponding
POSI (eg. UP-UP) while SWT is (ON). Toggle positions of SWC and SWA/SWD to select different POSI.
2. When flight mode 1 in MP is Stabilize, the first ATTITUE on transmitter should be set as
Stabilize and the corresponding parameters setup in MP should be set as below:
1
Check the first attitude, if POSI is (UP-UP) . If not, please toggle the switch to the right position
with - swt- is on
2
Turn the dial to the percentage rate on the transmitter LCD screen and PUSH to select and turn
the dial to modify
3
Check the PWM value of the corresponding flight mode on MP
When setting the PWM value on transmitter, the corresponding PWM value on MP will change accordingly.
Each flight mode has the PWM range and when the value is within, it means the current mode is set.
[ ATTITUDE ]
CH: CH5
- rate -
- posi -
- swt -
STABL.
PHOLD
LOITER
ARCO
AUTO
HOVER
( ON )
( OFF )
( OFF )
( OFF )
( OFF )
( OFF )
SW3: SwC
SW2: SwD
Stabilize M.
Alt-Hold M.
Pos-Hold
RTL M.
