RadioLink Electronic Ltd
4
More details about AT9S, please download the manual via the below link:
http://RadioLink.com.cn/doce/UploadFile/ProductFile/AT9SManual.pdf
All RadioLink products manuals available via the below link:
http://RadioLink.com.cn/doce/product-user-manual.html
2.1.2 Arm
2.1.2.1 Arm F450
Power on the transmitter and aircraft, make sure the throttle stick is at the lowest position and press the safety
button (Red) till the indicate LED is always on instead of flashing.
2.1.2.2 Arm Transmitter
When the safety button on F450 is always on, pilots have better keep distant from the aircraft to ensure the
safety and check the current flight mode. The transmitter can only be armed under the Stabilize Mode and
Alt-hold Mode.
Arm and Disarm (Shown with RadioLink T8FB as below. AT9S/AT10II can be (dis)armed as the
same way):
Arm with Left Throttle:
Toggle the left stick(Throttle) to the right bottom for 2s and a beep sound can be
heard from the aircraft. The indicate color on flight controller will be flashing blue. Slightly push the throttle at
the Stabilize Mode (If at Alt-hold Mode, the throttle better to be pushed over the central point), the motors and
propellers start moving means the aircraft is successfully unlocked.
Disarm with Left Throttle:
Throttle to the left bottom for 2s, the motors stop moving.
Note
If arming with success at the Alt-Hold Mode, the aircraft will take off only after the throttle gimbal stick
is toggle above the central point. When the aircraft reaches a certain height, toggle the throttle stick back to
center and it will remain at this height.
