RadioLink Electronic Ltd
10
2.2.3 Transmitter Parameters Setup
The flight controller of F450 has been set with all necessary parameters before purchasing. For the
stand-alone version, please calibrate the transmitter sticks, set the flight modes and Fail Safe.
2.2.3.1 Transmitter Calibration
Before the transmitter sticks calibration in Mission
Planner, please make sure the model type selected in
transmitter is multi-rotors and the phase is REVERSED.
Below detailed steps take AT9S as an example while
T8FB can be directly calibrated with sticks. For the
calibration of other brands’ transmitter, please kindly refer
to the its instruction manual.
Press “MODE” for more than 1s to enter the BASIC
MENU and choose “MODEL TYPE”, rotate the dial to
select “MULTIROTORS”and press “PUSH”to save, then
“END”to exit.
Note:
For AT9S, the throttle phase needs to be set REV while that of T8FB and AT10II are REV by default.
Press “MODE”for 1s to enter the BASIC MENU and choose“STEERING REVERSE”and select 3: THROTTLE.
Then “PUSH”to select and rotate the dial to “REV” and “PUSH”to confirm then “END”to exit.
Make sure binding between the transmitter and the receiver is complete before connecting Mini Pix with
Mission Planner on computer via USB cable with the Baud Rate of 115200 . The connection between Mini Pix
and Mission Planner can be also achieved by data transmission with the Baud Rate of 57600. Then power on
the transmitter. Press PUSH to unlock the transmitter if no operation for a long time and it enters standby
mode.
Open Mission Planner => select the corresponding Baud rate and port => click to connect => INITIAL
SETUP =>MANDATORY HARDWARE => RADIO CALIBRATION =>CALIBRATE RADIO
Note:
Ports varies from different computers. Please select the correct port to connect. Connection may fail
with several ports in use. Please remove the other connections.
[MODEL TYPE]
RESET:
Execute
TYPE:
MULTIROTOR
ATLE-2:
CH6 or 7
ATL:
OFF
[ REVERSE ]
CH3: THRO
REV
NOR
CH9 : REV
CH10: NOR
AILE
NOR
ELEV
NOR
THRO
REV
RUDD
NOR
ATTI
NOR
AUX1
REV
AUX2
NOR
AUX3
REV
