RadioLink Electronic Ltd
12
If the green bars do not change when pilots toggle the sticks, please check if the receiver has connected
successfully. Also, check if every corresponding green bar for every channel works as listed:
CH1: low position = roll (towards the left), up position= roll (towards the right).
CH2: low position =pitch(upward), up position =pitch(downward).
CH3: low position =reduced speed (downward), up position =speed up(upward).
CH4: low position = yaw (anticlockwise), up position = yaw (clockwise).
After each green bar reaches the limits/red lines, click the green button at bottom right to complete the
transmitter calibration.
2.2.3.2 Flight Modes Setup
Setup in transmitter
Setup steps of RadioLink transmitter(T8FB/AT9S/AT10II) and flight controller with Mission Planner are as
below. For the transmitters from other brands, please select CH5 to set flight modes and SBUS output in
receiver.
Mini Pix has various flight modes for option. But F450 is with four flight modes as factory setting by default
including Stabilize Mode, Alt-Hold Mode, Pos-Hold Mode and RTL Mode. Therefore, if no other flight modes
needed, pilots just set the flight modes in transmitter corresponding to those in flight controller.
