RadioLink Electronic Ltd
17
=> Long press PUSH to get the throttle percentage 3% => Press END to the main display => Push the throttle
trim lever back to 0. The Failsafe setup is complete.
Mission Planner Setup
After setting failsafe on transmitter, power it off and check the FAILSAFE menu on MP if the PWM value of
CH3 is smaller than 975. If yes, than the FAILSAFE function is successfully set. Otherwise, the above steps
need to be repeated.
In the RADIO block on the right of the sheet, set ENALBLED always RTL and FS Pwm as 975.
2.2.4 ESC Calibration (First flight)
ESC calibration varies depending on different ESC brands, so it’s advised to refer to the ESC instructions.
Never install propellers before calibrating ESC for safety.
(1) Make sure the aircraft is well connected and radio calibration is done and can be armed;
AILE
ELEV
THRO
RUDD
ATTI
AUX1
AUX2
AUX3
[ F/S ]
CH3: THRO
