36
MAINTeNANCe
General Maintenance Procedures
maintenance must be carried out in accordance with these instructions, and must
be conducted by designated, qualified and competent personnel.
Always isolate the power supply before carrying out any work on the Rada
Pulse system.
when ordering spare parts, please state the product type, i.e. rada pulse, and
identify the part name and number (refer to section:
'spare Parts'
).
should an internal malfunction occur then this will probably require component
renewal.
components are precision-made, so care must be taken while servicing to avoid
damage.
periodically check that the cover screws or cap screws are tight.
Cleaning Procedures
external surfaces may be wiped clean with a soft cloth, and if necessary, a mild
washing-up type detergent or soap solution can be used.
Warning!
many household and industrial cleaning products contain mild abrasives
and chemical concentrates, and should
not
be used on these products.
Preventative/Precautionary Maintenance
(Planned Maintenance Programmes)
The frequency and extent of attention required will vary according to prevailing site
and operational conditions.
six-monthly
Visual Checks:
The product and cabling should be checked for signs of wear or
damage, etc. if items are damaged they should be replaced.
solenoid Valves:
where appropriate check internal component condition. inspect
for debris, scale deposition, deformation, damage, corrosion, etc. maintain or renew
as necessary.