Master
Address mode
List box {Binary (1 B); Binary (2B LSB first); Binary (2B MSB first)}, default = "Binary (1 B)"
RipEX reads the Protocol address in the format and length set (in Bytes).
Address position
Specify the sequence number of the byte, where the Protocol address starts.
Note
3964(R) protocol is using escape sequence (control sequence) for DLE(0x10). I.e. when
0x10 is in user data, 0x1010 is sent instead. When address position is calculated, the
bytes added by escape sequence algorithm are not taken into account.
Note
The first byte in the packet has the sequence number 1, not 0.
RipEX2 Radio modem & Router – © RACOM s.r.o.
88
Settings
