The DHCP server is running on this service interface to enable easier connection of the management
device (PC, tablet or smart phone).
Enable / Disable
Each of the ETH or WiFi service can be enabled or disabled separately. When the WiFi is enabled,
the unit acts as a WiFi Access Point (AP).
IP / Mask
IP address of the DHCP server. This is the IP address to be used when accessing the unit manage-
ment via this serial interface.
DHCP pool start
Default = IP address of the DHCP 1
DHCP Server assigns addresses to connected clients starting from this address.
DHCP pool end
DHCP server assigns IP addresses to connected clients in the range defined by
DHCP pool start
and
DHCP pool end
(inclusive).
WiFi
WiFi AP parameters can be customized.
SSID automatically
List box {On; Off}, default = "On"
RipEX2 Radio modem & Router – © RACOM s.r.o.
148
Settings
