The connection to remote radio proceeds...
The IP address of the actually connected RipEX2 unit is displayed as part of the Remote access button.
All the configuration settings are remotely available using standard web interface. Some of the Diagnostic
features are available via local connection only.
Remote access connection can be established directly by entering the IP address of the Remote unit
as an additional parameter into the URL. The required format is:
url="https://LOCAL_UNIT_IP_ADDRESS?remoteAccessTarget=REMOTE_UNIT_IP_ADDRESS"/>
for example: https://192.168.141.210?remoteAccessTarget=10.10.10.212
Note
It is possible to use this URL format to make a web browser’s bookmark. Such a bookmarks
can be used for faster access to remote units.
59
© RACOM s.r.o. – RipEX2 Radio modem & Router
Web interface
