a.
Prepare the antenna bracket based on the diameter of the mast tube. For smaller diameters face
the bent part of the saddle plate (part No. 3) inwards. For larger diameters it should face outwards.
Screw the bolts (part No. 1) into the clamp plate (part No. 4) so that they protrude approx. 1 cm
through the clamp plate. Clamp the saddle plate to the mast by tightening the nuts (part No. 2) on
the bolts.
Fig. 5.5: Position of the saddle plate for
ø 40–80 mm
Fig. 5.6: Position of the saddle plate for
ø 65–115 mm
b.
Slide the antenna bracket onto the mast tube and clamp to the mast by tightening the nuts.
Fig. 5.7: Attaching the bracket to the mast tube
RAy Microwave Link – © RACOM s.r.o.
38
Installation
