Queue management
Fig. 6.13: Configuration menu Settings – QoS – Queue management
Setting the operation mode of output queues. These are internal switch queues for organization of
packets based on individual QoS rules.
Note
To enable configuring output queues, you must enable at least one of the QoS rules.
Mode
Regime for sending out packets from individual queues.
•
Strict
– If there are packets in a high priority queue, packets from that queue are
sent out. Only after this queue is completely empty, packets from a lower priority
queue are sent out.
•
WFQ
– Weighted Fair Queuing. Packets from individual queues are sent out accord-
ing to set ratios (see below).
Ratio Mode
Turns on the WFQ regime sending out ratio.
Queue 0..3
Setting parameters (ratios) of packets sending out for individual queues.
•
Strict column – Maximum output speed [Mbps] for individual queues. Allowed range
0 .. 400 [Mbps]
•
WFQ Column – Packet sending out ratios for individual queues. Higher values
means more frequent sending out from the given queue.
RAy Microwave Link – © RACOM s.r.o.
76
Configuration
