c.
The second part of the bracket – mounting plate (part No. 5), is screwed to the antenna dish with
three bolts (part No. 6). Screw the eye hook into the upper threaded hole of the dish to ease
handling of the dish during installation. The position of the eye hook on the dish and hanging bolts
on the plate change according to the type of installation, see Section 5.2.1, “Mounting methods”.
Fig. 5.8: Dish without mounting plate
Fig. 5.9: Dish with mounting plate
d.
Screw the hanging bolt (part No. 7) into the upper hole of the mounting plate so that the antenna
can be hung on the mounting plate holder. Hang the antenna on it and tighten the lower bolt. (part
No. 8)
Fig. 5.10: Hanging the bolt on the holder
Fig. 5.11: Correct position of the mounting plate
39
© RACOM s.r.o. – RAy Microwave Link
Installation
