Opens a dialog for uploading firmware package to the unit buffer. Only
after firmware has been prepared in the buffer, you can perform the
actual upgrade.
Open file upload
Use the
Upgrade
button on the bottom bar to perform the firmware in-
stallation.
Upgrade
Warning
Installing the firmware takes several minutes (about 10 minutes). During this time,
transmission of user data is interrupted (for about 8 minutes). Do not interrupt the power
supply during firmware installation!
■
Radio adaptation
Fig. 6.29: Configuration menu Tools – Maintenance – Radio adaptation
Radio type
Important
Applies only to links operating in the ISM band (RAy17, RAy24).
Hardware of these links is universal for the entire frequency band. To facilitate the configuration of
radio parameters, units are coded for L (Lower) and U (Upper) part of the band. L or U band assign-
ment can be modified.
Radio unit type: L (Lower) or U (Upper) part of the frequency band.
Use the
Change
button to change the radio type.
Radio type
RAy Microwave Link – © RACOM s.r.o.
96
Configuration
