TCP/UDP ports
Fig. 6.12: Configuration menu Settings – QoS – TCP/UDP ports
Setting of QoS governed by number or range of TCP/UDP ports.
TCP/UDP ports
Enabling QoS according to TCP/UDP ports.
Prefer DSCP
If priority control is enabled according to DSCP and incoming packet is coloured
both by DSCP priority and matches one of the rules listed here – prioritization is
governed (with this option enabled) by the DSCP rules.
Stream 0..7
Up to 8 ranges of TCP/UDP ports can be configured. The range applies to both
protocols: TCP and UDP.
•
From
– Start of TCP/UDP ports range.
•
To
– End of TCP/UDP ports range If we want to prioritize only one port, use
same values for “From” and “To”. The range of TCP/UDP ports can be up to
255.
•
Side
– Defines whether it is a source or destination TCP/UDP port(s).
•
Queue
– The target output queue for packets matching the rule.
Warning
The QoS activation deactivates the Flow control and Ingress policing.
75
© RACOM s.r.o. – RAy Microwave Link
Configuration
