8
Template LED
[Green]
ON = The template in use agrees with that
shown by DIP switch setting
OFF = The template in use does not agree
with that shown by DIP switch setting
Restore Jumper JP5
Shorting these pins will result in the RTU
sending a configuration report to the website.
This report will configure the website to
match the template shown by DIP switches.
Template DIP Switch
This switch is used to set the RTU template
locally. Please refer to section 8.0 Preliminary
Local Configuration of the RTU.
Status LED – Power
[Amber]
ON = AC power is ON
OFF = AC power is OFF
Status LED – Radio
[Green]
BLINKING (1 sec. Heartbeat) = Radio
Operations Normal
OFF = No Service or Reinitializing Radio
Status LED – Account
[Green]
ON = Account ENABLED
OFF = Account DISABLED
POWER ON/OFF
Pushbutton
Toggles Power ON and OFF. Please refer to
section 15.0 for the proper shutdown
procedure.
POWER LED
[Green]
(visible with cover on)
ON = AC Power is ON
OFF = AC Power is OFF
BLINKING = AC Power is OFF, unit running
on battery
Summary of Contents for AlarmAgent.com AA-102DC
