Raco 1190642-0010, Translation Of The Original Instruction

Page: 20 / 49

2.2.7 Unauthorised modifications
Unauthorised modifications to the RACO electrical cylinder are prohibited. Such modification will inval-
idate all guarantee claims.
Material damage!
Welding work on the RACO electrical cylinder is prohibited!
Note!
Opening the RACO electrical cylinder will invalidate the guarantee, and can also lead
to damage. In case of problems or damage, the RACO electrical cylinder must be
opened and repaired only by the manufacturer.
2.2.8 Accessories
The RACO electrical cylinder can be extended with a wide range of accessories.
Further information on our accessories can be found on the Internet under www.raco.de or by tele-
phone from +49 2336 4009-0.
Note!
Accessories for the control of the end-position switches and for the motor can be found
in the appendix to these operating instructions.
2.2.9 Spare parts
The order numbers for spare parts are listed in the Chapter “Overview of the RACO cylin
der”.
Warning!
Use only RACO original parts. RACO accepts no liability for damage caused by the use
or installation of other parts. This will also invalidate the guarantee.
2.2.10 Disposal
Dispose of the RACO Electric Actuator properly in accordance with local environmental regulations.
The RACO electric actuator contains material: Steel, aluminum, copper, bronze,
plastic, grease and maybe electronic components.
Environment hurtful components may leave and damage environment in case of in-
appropriate disposal. Pollution of environment.
Absorb outpouring lubrication and depollute properly.
Disposal of product and its components has to be done appropriate and in accord-
ance with the effective national and international laws and regulations.
Revision: 03
2.2-17/17
154-457-8