IQ3 Drag Dash Installation Manual
9
Technical Specifications
Sensor Channels - Defined Below
Available V-Net Data Channels (optional additions)
6
Internal Channels as Defined Below
7
IQ3 Internal Channels
Voltage
Engine RPM
Driveshaft RPM
Gear Position
Water Temperature
Oil Pressure
Trans-Brake event marker
Processor Speed
20MHz
Power & Current
Input Voltage
9-18V
Current Draw
350mA - Without warning and shift LED’s
active
Reverse Voltage Protection
Yes
Operating Temperature
32 - 140°F / 0-60°C
Mounting Orientation
Rear of dash facing direction of travel
Memory
Maximum microSD Card Size
microSD Flash - Included
Supports microSD and microSDHC cards up
to 16GB.
Sample (Logging) Rates of Data Channels
IQ3 Internal Channels
100 Hz Maximum, user adjustable to 1 Hz
Vnet Channels
100 Hz Maximum, user adjustable to 1 Hz
Engine RPM Input
50% duty cycle, 5-18V square wave signal
Start Logging Channel (factory default)
Either pushbutton held for +5 seconds