IQ3 Drag Dash Installation Manual
21
Factory Default Display Settings
The Racepak IQ3 Drag Dash is shipped with factory pre-programmed display pages. To modify
these display pages, you must use a PC, programming cables and the Datalink program. This is
outlined in the
Programming the Display Using the DataLink Software
area of this manual.
Using the external programming buttons, a factory reset can be performed to revert all settings
and pages back to as factory shipped (excludes hour/service values). Further details about the
display page settings can be located later in this manual in the
Programming the display
section
found on
page 35
.
From the factory, Page 1 of the IQ3 Drag Dash is programmed to display the following items.
.
From the factory, Page 2 of the IQ3 Drag Dash is programmed to display the following items.
