IQ3 Data Logger Dash Installation Manual
16
IQ3 Drag Dash Wiring Pinout
Connector Pinout
Pin
Position
Description
Color
Function / Wiring
1
Battery Positive
Red
Connect this input to a fused power source
that is hot only when the ignition switch is on.
We recommend using a 3 to 5 amp fuse when
making this power connection. The safe
operating voltage range is 9 – 18 volts DC.
2
Not Used
N/A
3
Not Used
N/A
4
Not Used
N/A
5
Trans brake
Blue
Connect to the trans brake button output
signal or trans brake solenoid terminal on
delay box. IQ3 Drag Dash is defaulted for a
voltage triggered signal. If a ground triggered
signal type is required, user can change this
inputs expected signal type using the
DataLink II software.
