IQ3 Data Logger Dash Installation Manual
36
8.
The DataLink program will check COM ports 1-255 for
the presence of a Racepak unit. If found, DataLink will
automatically configure the proper COM port setting for
you. If a Racepak unit was not found, and you are using
a USB to Serial Port adapter, ensure that you have
properly installed the device adapter driver on your PC.
9.
You can also manually configure the COM port settings
under
Settings
Preferences
.
Reading/Syncing of the Configuration File
1.
Open the DataLink software and select
File
from the main menu area
2.
Select
Open Car Configuration
from the pull down menu.
3.
A Select Configuration dialog window will open. A list of folders containing Configuration
files will appear on the left side, while the actual Configuration files appear on the right
side. Select
IQ3
in the left window and select
IQ3_Config_Drag
in the right window.
4.
Click
Edit
on the menu bar and select
Read V-NET Config
.
5.
A dialog box (shown right) will appear asking if you wish to
make this configuration the default configuration file. If
this is the only Racepak system you will be programming,
select the top option to make it the default. If using this PC
to program more than one Racepak system, select the
second box.
6.
A message log will appear and should begin reading your system configuration. When
finished the message log should display ******
DEVICES READ SUCCESSFULLY
******.