IQ3 Drag Dash Installation Manual
55
Viewing Real Time Data on your PC
Real Time data from your IQ3 Drag Dash data logger can be displayed and recorded on your PC
computer using the DataLink II program. Before you can view the data however, you must first
setup the real time parameters in your data logger. To setup your data logger’s real time
configuration, position the mouse cursor over the
IQ3 Logger
channel button, and click the right
mouse button.
The logger edit dialog box will be displayed (shown below). Located in the top of the dialog box
are tabs, locate and click on the
Dash Info
tab
An edit dialog box will be displayed. The top area of the dialog box will be a Real – Time Telemetry
Section.
