TO 31R2-2TRC199-1
Change 1
vi
VOLTAGES WITHIN THIS EQUIPMENT ARE HIGH ENOUGH TO ENDANGER LIFE.
Covers are
not
to be removed except by persons qualified and authorized to do so and these
persons should always take extreme care once the covers have been removed.
Page
2-1
WARNING - Installation of the tactical repeater requires a minimum of two people.
2-1
WARNING - Removing the tactical repeater assembly from the shipping carton requires a minimum of two
persons.
2-5
WARNING - Ensure proper use of safety tools (work gloves and hard hat) during assembly and disassembly of
antenna.
2-6
WARNING - Before using the hammer, ensure a wedge is placed in the top of the hammer so that the hammer
head does not come loose, thereby endangering personnel.
3-3
WARNING - Before performing removal/replacement procedures, make sure power is removed from unit.
Failure to do so could result in personal injury or equipment damage.
6-10
WARNING - Before performing removal/replacement procedures, make sure power is removed from the unit
by disconnecting from power source. Failure to do so could result in personal injury and equipment damage.
6-11
WARNING - This equipment is capable of generating RF power sufficient to cause RF burns. During transmit,
care should be taken to eliminate the possibility of touching exposed RF output points such as the center
conductors of coaxial cables or antenna feedpoints.
6-12
WARNING - Before performing removal/replacement procedures, make sure power is removed from the unit.
Failure to do so could result in personal injury or equipment damage.
2-1
CAUTION - Exercise care when removing units from packing material in order to prevent damage to the unit.
3-3
CAUTION - Never apply pressure sensitive tape directly to connectors. This could damage connector pins.
3-3
CAUTION - Package all electrostatic discharge (ESD) sensitive assemblies in ESD bags before shipping or
storing.
3-3
CAUTION - Rough handling may cause unnecessary damage to electronic assemblies.
3-3
CAUTION - Electronic assemblies containing solid-state devices are susceptible to damage from static electrical
discharges. Wear protective clothing and grounded wrist straps.
3-3
CAUTION - Forcing any tilted or cocked electronic assembly into position may result in bent or broken pins.
3-4
CAUTION - When repairing an electronic assembly, be careful that the tool employed does not inadvertently
press against leads, pins, or other parts that are easily bent.
WARNING
Summary of Contents for AN/TRC-199
