![background image](http://html2.mh-extra.com/html/racal-instruments/3152/3152_user-manual_3133316086.webp)
Maintenance and Performance Checks 5-1
5
Maintenance and Performance Checks
What’s in This
Chapter
This chapter provides maintenance, service information,
performance tests, and the information necessary to adjust and
troubleshoot the Model 3152 Waveform Synthesizer.
WARNING
The procedures described in this section are for use only by
qualified service personnel. Many of the steps covered in this
section may expose the individual to potentially lethal
voltages that could result in personal injury or death if
normal safety precautions are not observed
CAUTION
ALWAYS PERFORM DISASSEMBLY, REPAIR AND
CLEANING AT A STATIC SAFE WORKSTATION.
Disassembly
Instructions
If it is necessary to troubleshoot the instrument or replace a
component, use the following procedure to remove the side panels:
1. Using a Phillips head screw driver, remove the two screws on
each side of the instrument, and one screw at the rear of the
instrument that secures the side panels.
2. Grasp one side panel and carefully slide and lift it off the
instrument. Use the same procedure to remove the other side
panel. After removing the side panels from the instrument,
access the component side for calibration and checks, and the
solder side when replacing components.
3. When replacing the side panels, reverse the above procedure.
Summary of Contents for 3152
