Waveform Samples
Max. Lock Frequency
200,000
10
500Hz
10MHz
Specifications A-10
Coarse Phase Offset Control
Range
±180
%
Resolution
Std. Waveforms
0.72
%
, frequency setting from 500 Hz to 200 kHz;
360
%
x frequency (in MHz) / 100, frequency setting from
200 KHz to 10 MHz
Arbitrary Waveforms
360
%
/ waveform samples
Accuracy
5.4 x frequency (in MHz) + resolution / 2 ±5
%
Fine Phase Offset Control
Range ±36
%
around coarse phase offset setting
Resolution
0.01
%
Accuracy
10%, typical
Frequency Counter
Operation
Made available to the user in PLL mode only.
Frequency reading is valid only when PLL ON LED is lit
Range
Same as External Lock Frequency Range above
Resolution
4 digits
PM Characteristics
Operation
External signal offsets phase. This input is operational
in PLL mode.
Bandwidth
See graph below
Summary of Contents for 3152
