- 29 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
6.4
Function selector (optional)
6.4.1
Installing the function selector
1
2
3
on off
1
2
5
4
3
Legend
1
Suction cup with mechanical switch
2
Cab power supply cable
3
Solenoid valve connectors
4 Extension
5 Black
cable
IMPORTANT:
Check the length of the cables, they must not be
too short (risk of breakage or tearing), nor too long
(trapping or pinching of the cable in the mechanical
joints, wheels, etc.).
ʈ
$WWDFKWKHER[SURWHFWLWIURPGXVWDQGPRLVWXUHLQWKHFDEE\
turning the thumb wheel (1) of the suction cup.
ʈ
7KHER[VWZRFRQQHFWLRQFDEOHVDQGPXVWEHSURSHUO\
connected.
ʈ
The tractors are equipped (in the cab) with a socket for
connection (3 pin DIN connector, European standard). The
power supply of the function selector (2)
ʈ
If there is a permanent power supply, set the function selector
to the off position (switch down) when it not in use, so as to
avoid discharging the tractor battery.
ʈ
The grey cable (5) is used to connect the switch to the
H[WHQVLRQDQGWRWKHVROHQRLGYDOYHVDWWDFKHGWRWKH
coupling head of the implement.
IMPORTANT:
When the implement is stored outdoors, the box
must be stored in a clean and dry place.
IMPORTANT:
If control malfunctions occur, check the power
supply to the solenoid valves Remove the sheet
metal casing protecting the solenoid valves. The
DIN 4 pin stud connectors (3) are equipped with
a green LED that lights when the power supply is
correct.
6.4.2
Electrical connections of the solenoid valves
0 1 2 3 4 5 6 7 8 9
Off
2
3
5
1
2
3
4
+
+
+
-
-
-
+
-
5
Legend
1 Selector
switch
2 Terminal
block
3
Offset solenoid valve
4
Turnover solenoid valve
5
Solenoid valve for the options
7KHVROHQRLGYDOYHVFRQWUROOHGE\WKHER[DUHHOHFWULFDOO\
powered by the electrical outlet on the tractor. To energise the
solenoid valves, turn on the tractor position lights.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
