- 25 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
ʈ
Once the lower link arms are properly hitched, raise the
headstock with the tractor lifting mechanism to release the
latch.
ʈ
Once the latch is free in its hole, lift it and secure it i the up
position (remove the spring pin then the pin, lift the latch,
UH¿WWKHSLQDQGWKHVSULQJSLQWRUHWDLQWKHODWFKLRQWKHXS
position).
ʈ
Attach the top link.
5.1.4
Hitching the top link
Once the lower tractor arms are hitched and the latch is released,
connect the top link.
Raise the implement and make sure there is no collision with the
tractor.
Place the support legs in working position.
Place the support leg in working mode.
-
Remove the safety pin and the pin, fold up the support leg,
UH¿WWKHSLQDQGWKHVDIHW\SLQWRVHFXUHWKHOHJLQWKHXS
position.
IMPORTANT:
Check that the space between the implement yoke
DQGWKHWUDFWRUWRSOLQNLVVXI¿FLHQWWRSUHYHQWDQ\
contact between the raised position and the working
position. Perform a second check at the workplace
¿HOGZKHQWKHLPSOHPHQWLVXQGHUDFWXDOZRUNLQJ
conditions.
5.1.5
Electrical connection of the signalling
HTXLSPHQW
1
Legend
1
Tractor power socket
ʈ
Connect the lighting cable to the tractor power socket.
5.1.6 Hydraulic
connections
ʈ
See Chap. 6
5.1.7
Position of support legs
Unhitched position
1
2
3
Legend
1
Front support legs
2 Retaining
pins
3
Safety pins (x2)
ʈ
La implement is equipped with two stands (1) located either
side of the headstock.
ʈ
With the implement hitched, raise it using the tractor's lifting
mechanism, until the support legs (1) are lifted off the ground.
2
3
Legend
2 Retaining
pins
3
Safety pins (x2)
ʈ
Remove the safety (pins (3) from the pins (2). Remove the
retaining pins from their holes and fold up the support legs into
the transport position.
ʈ
5H¿WWKHUHWDLQLQJSLQVDQGWKHVDIHW\SLQVLQWKHLU
location.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
