- 18 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
3.14 Working
width
IMPORTANT:
The multi-position shoes vary according to the type
of safety system chosen.
Multi-position shoe for safety system B
A
C
E
B
D
1
Multi-position shoe for safety system X and Y
A
C
E
B
D
1
Multi-position shoe for safety system Z
A
C
E
B
D
1
Legend
1 Multi-position
shoe
The working width of each body is adjusted by means of a shoe
EROWHGRQWKHIUDPH7KHUHDUH¿YHSRVVLEOHVHWWLQJVRQHDFK
implement:
ʈ
12’’, 14’’, 16’’, 18’’, or 20’’ on implements with an inter-body
clearance of 1.00 m.
ʈ
14’’, 16’’, 18’’, 20’’, or 22’’ on implements with an inter-body
clearance of 1.14 m.
For the implement to work properly, all the shoes must be
adjusted to the same setting. (See 7.3).
IMPORTANT:
Any change to the working width of the bodies
will require a re-adjustment of the wheel angle
adjustment arm.
Adjustment arm
1
3
5
2
4
1
Legend
1 Adjustment
arm
Set the adjustment arm as per the table. (See 7.4).
3.15 Mould
board
1
2
Legend
1 Solid
body
2 Slatted
body
The mould boards of the implement are:
-
Solid.
-
Slatted. The slatted versions are intended to be used in sticky
ground conditions.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
