- 36 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
7.7
Transport and working depth
adjustment wheel
IMPORTANT:
Check the general condition of the wheels daily.
7.7.1 Tyre
pressures
IMPORTANT:
Regularly check the pressure of the tyres. The
pressure in the tyres must never be less than the
recommended min. tyre pressure.
Tyre size
Working pressure
pressure
bar / MPa
Maximum speed
km/h / mph
17.5/24
3.2 / 0.32
25 / 15
16.0/70-20
3.5 / 0.35
-
Follow the manufacturer's recommendations (values marked
on the sidewall of the tyres).
CAUTION:
$QRYHULQÀDWHGW\UHULVNVWREXUVW
$QXQGHULQÀDWHGW\UHULVNVFRPHRIIWKHULP
7.7.2
Tightening of wheel studs
-
The 1
st
time after 10 hours or 50 km.
-
Again after 10 hours or 50 km.
-
Check the tightening of the studs daily.
-
Check the torque before the start of the season and every 50
hours during use.
IMPORTANT:
:KHHOV¿WWHGZLWKVWXGGHGW\UHVUHTXLUHSDUWLFXODU
attention (high vibration when driving on the road).
8 C
HANGING
BETWEEN
TRANSPORT
AND
WORKING
POSITION
DANGER:
Risk of electric shock.
,QWKHHYHQWRIFRQWDFWRULQVXI¿FLHQWGLVWDQFH
between the implement and live high voltage power
lines, there is a risk of severe, even fatal injuries
- Never use the implement in the immediate vicinity
of live power lines or electrical equipment.
Maintain a minimum safety distance of 6 m from live
power lines or electrical equipment.
- Never stand close to the implement when it is
used in the vicinity of live power lines or electrical
equipment.
Before driving on a public road:
ʈ
Place the implement in the transport position.
ʈ
Check the operation and cleanliness of the signalling and
lighting devices.
8.1
Changing to transport position
ʈ
Close the offset compass
CAUTION:
Ensure that all hydraulic control valves are locked
LQWKHÀRDWLQJRUQHXWUDOSRVLWLRQEHIRUHGULYLQJRQD
public road.
1
Legend
1 Offset
compass
ʈ
Turn the plough through a quarter turn then lock it in the
WUDQVSRUWSRVLWLRQH[WHQGWKHORFNLQJEROWXVLQJWKH
operating handle.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
