- 67 -
M
AINTENANCE
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
5H¿WWLQJSURFHGXUH
ʈ
5H¿WWKHZKHHO
IMPORTANT:
Check the assembly of the nuts on the rim - The
spherical bearing must be perfect.
Replace the nuts and/or the rim according to the
state of the damaged part.
ʈ
5H¿WWKHQXWV
ʈ
Lower the hydraulic jack.
ʈ
Tighten the nuts.
ʈ
Return the implement to the transport position.
IMPORTANT:
Check the tightening of the wheel studs after a few
kilometres, and re-tighten if necessary.
IMPORTANT:
When changing the tyre, pay attention to the
GLUHFWLRQRI¿W7KHKHUULQJERQHWUHDGPXVWEHLQWKH
opposite direction compared to a driving wheel.
16 S
PARE
PARTS
In order to ensure the reliable operation and long service
life of your implement, only use original spare parts from the
manufacturer. The use of any parts, other than those provided by
the manufacturer automatically voids the warranty.
IMPORTANT:
This implement carries a CE conformity mark. Use
only new original replacement parts approved by the
manufacturer.
ʈ
Ensure that replacement parts are correctly installed and
positioned in the right direction. Check the implement each
time a part is installed and after each maintenance operation
to check correct operation.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
