- 27 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
5.3
Unhitching the implement from the
tractor
CAUTION:
Make sure that there is no-one in the vicinity of the
implement before lowering it.
IMPORTANT:
Before detaching the implement, make sure
WKDWWKHJURXQGLVVXI¿FLHQWO\OHYHODQG¿UP2Q
moist ground, place wooden blocks to wedge the
components and the support legs.
-
Proceed in reverse order to attachment to detach the
implement:
ʈ
Place the implement in the working position, it should rest on
its left-hand or right-hand plough bodies.
ʈ
Position the support legs.
ʈ
Place the elements vertically using the turnover cylinder,
the coupling head must be horizontal, this will simplify the
operation.
ʈ
Lower the implement to the ground.
ʈ
Detach the top link.
ʈ
Place the latch in the unhitched position.
ʈ
Disconnect the tractor power socket.
ʈ
Depressurise the hydraulic circuit, disconnect the hydraulic
couplers and the function selector (store it away in a dry place)
ʈ
Unhook the lower link arms.
5.3.1 Decompression
kit
2
1
Legend
1 Decompression kit
2 Yoke
3
4
Legend
3 Coupler
4 Coupler
When you unhitch your implement, connect the two hydraulic
couplers of the turnover system onto the couplers (3 and 4) on
WKHGHFRPSUHVVLRQNLWVSHFL¿FDOO\LQWHQGHGIRUWKDWSXUSRVH
IMPORTANT :
When the tank is full, remove it and empty it into a
suitable container.
'RQRWHPSW\K\GUDXOLFÀXLGRQWRWKHJURXQGRULQWR
the environment.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
