Rabe Kormoran PF 180, Operating Instructions Manual

Page: 17 / 72

- 17 -
O
PERATOR
'
S MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
3.12 Extensions (optional)
The implement is available, as standard, in 5-, 6- or 7-furrow
EHDPFRQ¿JXUDWLRQVZLWKRXWH[WHQVLRQV
The wheel is overhanging, positioned opposite the front of the
last body.
1 2
Legend
1
Additional front body
2 Additional rear body
You have the option of adding:
ʈ
An additional body on the rear (2), after the implement's last
ERG\7KLVH[WHQVLRQFRPSULVHVRQO\RIDQH[WHQVLRQWRWKH
main frame. The position of the wheel changes, its overhang is
reduced, as the last body partially removes its track.
ʈ An additional body at the front (1), between the 1 st and the 2 nd
ERGLHV7KLVH[WHQVLRQFRPSULVHVDPDLQIUDPHH[WHQVLRQDQG
requires the replacement of the stabilisation bar. The position
of the wheel remains unchanged.
7KHPD[LPXPDOORZDEOHQXPEHURIIXUURZVLV
- 9 for implements equipped with a releasing bolt safety system
(B).
-
IRULPSOHPHQWV¿WWHGZLWKQRQVWRSK\GUDXOLFRUPHFKDQLFDO
safety systems.
IMPORTANT:
The addition of an extra body on the front of the
implement is an operation requiring suitable lifting
equipment and tools. It must be performed by
TXDOL¿HGSHUVRQQHO&RQWDFW\RXUGHDOHU
3.13 The wheel unit
3
1
2
Legend
1 Hydro-pneumatic
accumulator
2 Adjusting screw
3 Adjustment arm
Single-wheel implements are equipped with a single side-arm
ZKHHOXQLWVLQJOHDUPVLPSOL¿HVZKHHOUHPRYDOIRUUHSDLU
The "Z" beam design allows the mounting of wheels with large
diameter tyres.
The wheel unit is directional. The wheel angle can be changed by
operating the rack and pinion turnover system in order to steer
the implement.
The wheel serves to transport the implement and adjust the
working depth. Its height is controlled by a single-acting cylinder.
- When working: depth is controlled by means of an adjustment
screw (2). An adjustment arm (3) aligns the wheel with the
plough pull line.
- During transport: a safety stop must be placed to prevent
any risk of the frame dropping onto the wheel in the event of
a hydraulic hose failure on the hydraulic lifting circuit. While
travelling, a hydro-pneumatic accumulator (1) absorbs shocks
and isolates the implement and the tractor against uneven
ground.
1
Legend
1 Accumulator
'XULQJWUDQVSRUWUDLVHWKHZKHHOF\OLQGHUWRLWVPD[LPXPH[WHQW
and lower it by half its stroke, so that the accumulator (1) acts as
a damper.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV