- 33 -
O
PERATOR
'
S
MANUAL
KORMORAN PF 180 / HA 180
9901.00.21EN01 - 02/2017
Adjustment
1
3
5
2
4
1
Legend
1 Adjustment
arm
Arm
position
Angle
Working width
Inter-body
clearance 1.00 m
Inter-body
clearance 1.14 m
1
18°
12" - 30 cm
14" - 35 cm
2
21°
14" - 35 cm
16" - 40 cm
3
24°
16" - 40 cm
18" - 45 cm
4
27°
18" - 45 cm
20" - 50 cm
5
30°
20" - 50 cm
22" - 55 cm
1
2
Reducing the arm angle (1):
-
The wheel moves closer to the frame of the implement (2).
Increasing the arm angle:
-
The wheel moves away from the frame of the implement.
IMPORTANT:
When working, the wheel must always be parallel to
the body.
7.4
Calibration of non-stop hydraulic
safety devices
Adjustment tips
Minimum pressure:
120 bar (factory setting)
Maximum pressure:
170 bar
ʈ
Where there are differences of calibration between the
bodies, gradually increase the pressure in the bodies of the
implement.
ʈ
Set the restoring force so that the bodies of the implement
UHPDLQVWDEOHDQGDUHSURSHUO\GHÀHFWHGZKHQSDVVLQJRYHU
stones.
Adjustment
bar
1000
2000
3000
4000
5000
psi
0
100
200
300
400
zu / close / fermée
auf / open / ouverte
ɡɚɤɪɵɬɨ
открыто
3.
1.
2.
4.
Legend
1 Supply
hose
2 Valve
open
3 Manometer
4 Valve
closed
ʈ
1. Connect the hydraulic hose of the stone protection system
to a single-acting control device on the tractor.
ʈ
2. Open the stop valve.
ʈ
3. Adjust the hydraulic pressure using the manometer.
ʈ
4. Close the stop valve when the set pressure is reached.
6XEMHFWWRWHFKQLFDOPRGL¿FDWLRQV
