14
Getting Started
Figure 2.2 Screen Capture of the Stand-Alone Configuration Program, Showing an
EM1500 with Factory Defaults
A factory-default EM1500 will have SER2 set to 19200 bps for speed and 8N1 for serial port geometry.
The screen shot shows the Serial tab selected for SER2. You may access this information by clicking on
the Serial tab and then on the SER2 tab. (Please see
Chapter 5. “EM1500 Configuration,”
for more infor-
mation about the stand-alone program.)
If using DHCP did not result in an IP address being assigned to the EM1500, you will need to assign one
manually. First, get an IP address from your network administrator.
Now, click on the Network tab and type in
the IP address in the first field of the Net-
work dialog. Save the configuration change
by pressing <Ctrl+S> (or by clicking on File
| Save). You will see the entry for your unit
updated in the upper left portion of the pro-
gram window to include the IP address. This
is the value you will use in the telnet com-
mand described in the next section.
Summary of Contents for EM1500
