PJ5KPS
14 / 80
User & Technical Manual
Rev. 1.5 - 08/02/06
!
Caution:
The connection of the machine to the electric alimentation is performed
fixing to a 5 poles cable with bare terminals to a terminal block. Making sure without
any possibility of error that the cable is not under tension while working on it.
It is reccomended not to turn on the machine without first have connected the RF exit
to the antenna or to the dummy load!
The PJ5KPS requires triphase alimentation (3F+ N) able to give 16A for phase.
Keep this requirement in mind in connecting to the personal distribution board.
10.Reposition the protection panels of the RF modules and of the transformer/rectifier
carriages.
11.If the PJ5KPS was not supplied complete with pre-assembled exciters, insert
and connect the exciters into the appropriate housings. The connecting cables
for the exciters are already inside the rack, namely:
•
Right/MPX bal. audio connection (XLR connector)
a)
b)
Figure 5-4
Power supply carriage connectors
a)
b)
Figure 5-5
Power supply cable
Summary of Contents for PJ5KPS
Page 1: ...PJ5KPS User Technical Manual Manifactured by Italy ...
Page 4: ...This page intentionally left blank ...
Page 6: ...PJ5KPS ii User Technical Manual Rev 1 5 08 02 06 This page was intentionally left blank ...
Page 86: ...PJ5KPS 80 80 User Technical Manual Rev 1 5 08 02 06 This page was intentionally left blank ...