R.V.R. Elettronica PJ5KPS, User'S & Technical Manual

Page: 73 / 168

PJ5KPS
67 / 80 User & Technical Manual Rev. 1.5 - 08/02/06
• SMA connector for the GSM antenna. The GSM modem can be directly installed
inside the TLC5KPS: in this way the machine will provide the named SMA
connector, the status LEDs of the modem and the slot for the GSM SIM card.
Please note that an external and possibly directive antenna for the GSM is always
suggested, to provide the GSM modem with a good signal and ensure reliable data
communications.
Please note that to fully deploy the features of this telemetry system, the you will need
to sign a contract with a GSM service provider including DATA COMMUNICATIONS.
9.2.2 Devices settings
The use of the telemetry system requires the correct setting of the addresse in the
connected pieces of equipment, since they communicate on a shared bus.
9.2.2.1 Exciters
Set the Uart address of exciter 1 to “1”, exciter 2 to “2”
To perform this setting, from the main menu click on “ADMIN”, then select Genst from
the navigation bar, select “Uart Adr.” on the General Set menu and change it to “1” fro
the exciter 1, “2” for the exciter 2.
9.2.2.2 Amplifier
Set the “Talk address” parameter to “3”.
To perform this setting, presss the button ESC on the Control Unit of the PJ5KPS.
You will be presented with the “Menu Select” screenful. With the UP and DOWN
buttons, select the line “Settings” and press the OK button.
In this menu, select the line “Talk Address” and press OK. With the UP and DOWN
buttons change the parameter to “3” and press OK.